e. protocol uses point-to-point connectivity
f. protocol uses point-to-multipoint connectivity
answer:bce
7. in a customer’s network, vlan trunking protocol (vtp) is running with a domain named main1. vlans 1,2,3,4,5,10,20 are active on the network. suddenly the whole network goes down. no traffic is being passed on vlans 2,3,4,5,10,20, however traffic passes on vlan 1 and indicates all switches are operational. right before the network problem occurred, a switch named test1 was added to the network. what three configuration issues on test1 could be causing the network outage? (choose three.)
a. test1 is configured as a vtp server with a different domain name.
b. test1 is not configured to participate in vtp.
c. test1 is configured as a vtp server with the domain name main1.
d. test1 has a lower vtp configuration revision than the current vtp revision.
f. test1 is configured with only vlan1.
answer:cef
8. what is correct about the bgp synchronization command? (choose two.)
a. synchronization must be enabled when implementing a multi-homed bgp connection to multiple isps.
b. if it is turned on, a prefix learned from ibgp neighbor is valid only if a non-bgp (igp) route exists for that prefix.
c. synchronization is necessary when peering with an ebgp neighbor.
d. synchronization improves bgp routing convergence.
e. synchronization can be turned off if all the transit routers in an autonomous system running full mesh ibgp.
answer:be
9. drag the appropriate is-is routing term to its correct definition
10. router rta is configured as follows:
rta (config)#router rip
rta(config-router)#network
rta(config-router)#distribute-list
